|
ATTACHMODE
|
Controls whether or not the
reference attachment commands (XATTACH,
IMAGEATTACH,
DWFATTACH,
DGNATTACH,
PDFATTACH,
ATTACH) are integrated with
ProjectWise:
- If set to
1 (default) - reference attachment
commands are integrated with
ProjectWise.
- If set to
0 - integration with reference
attachment commands is disabled.
|
| CUTLAYOUTONPUBLISH
|
Controls whether or not the
layout name of the sheet is included in the file name of the PDF, when
publishing a single sheet to a PDF:
- If set to
1 (default) - the layout name is not
included in the file name of the PDF
- If set to
0 - the layout name is included in the
file name of the PDF
|
|
ETRANSMITMODE
|
Controls whether or not File
> eTransmit is integrated with
ProjectWise:
- If set to
1 (default) - File > eTransmit is
integrated with
ProjectWise.
- If set to
0 - integration with File >
eTransmit is disabled.
|
|
MISSINGPWREFRESTORE
|
(This is
an internal variable and should not be changed by the user.)
|
|
PLOTTINGMODE
|
Controls whether or not plotting
in AutoCAD is integrated with
ProjectWise. This can be useful to allow
third party tools to perform their own plotting processing, such as batch plot:
- If set to
1 (default) - plotting is integrated
with
ProjectWise.
- If set to
0 - plotting integration is disabled.
|
|
PROFILEPWPATHS
|
Controls whether or not the
associated resource documents will be copied out of
ProjectWise (and therefore be made available
in the location specified in the AutoCAD profile) whenever the user opens a DWG
that is associated to a workspace profile that is linked to this AutoCAD
profile.
- If set to
0 (default) - associated resource
documents are not copied out.
- If set to
1 - associated resource documents are
copied out.
|
|
REFMISSINGMODE
|
Instructs integrated AutoCAD what to do when it
detects a missing external reference, when the reference is from
ProjectWise:
- If set to
0 - integrated AutoCAD will not check
for missing references.
- If set to
1 (default) - integrated AutoCAD
checks for missing references, and if any are found, the user is prompted about
how to handle the situation.
- If set to
2 - integrated AutoCAD checks for
missing references, and if any are found, the user is prompted to enter the
path to the missing reference(s).
- If set to
3 - integrated AutoCAD checks for
missing references, and if any are found, they are permanently deleted from the
master document without any prompts to the user.
|
|
REFMODE
|
Controls how references are to be reloaded
into the master document, if any of the master document's references happen to
be updated or checked in by another user.
- If set
to
1 - when another user updates a file
that is referenced into the master document you have open, the Select Documents
to Reload dialog opens to notify you of this update, and so you can select
which external references to reload.
- If
set to
2 - integrated AutoCAD reloads any
updated external references silently in the master file, without any
notification to you.
- If
set to
3 - no reloading takes place.
|
|
REFPATH
|
Controls how the reference path is stored:
- If set to
0 (default) - reference paths are
stored as relative paths.
- If set to
1 - reference paths are stored as
absolute paths.
|
|
REFRELOADMODE
|
(This is an internal variable and should
not be changed by the user.)
|
|
REFTIME
|
Sets how often (in minutes) integrated AutoCAD
checks for updated references.
|
| SHAREDSHEETSET
|
Controls whether the .DST file is automatically
checked out:
- If set to
1 - the .DST file will only be locked
when a user does an editable action (new sheet, rename, renumber, etc.).
- If set to
0 (default) - the .DST file is always
checked out.
|
| SHEETCHECKUPDATETIME
|
Sets how often (in seconds) integrated AutoCAD
checks for changes to a .DST file.
Recommend setting this to 600. Delaying the time
between update checks can improve performance by reducing network operations.
|
|
SHEETSETMODE
|
Controls whether or not AutoCAD Sheet Set
functionality is integrated with
ProjectWise.
- If set to
1 (default) - Sheet Set functionality
is integrated with
ProjectWise.
- If set to
0 - integration with Sheet Set
functionality is disabled.
|
| SHEETSETUNLOCKTIME
|
Sets the duration (in seconds) before .DST
files are checked back in.
|
|
SHOWMISSINGSHAPES
|
Controls how integrated AutoCAD handles missing
SHX files:
- If set to
1 (default), and you open a document
with one or more missing SHX file, a dialog opens, prompting you to select a
font to use in place of the missing SHX file.
- If set to
0, and you open a document with one or
more missing SHX file, the missing SHX files are simply ignored. AutoCAD
neither prompts you to select another font, nor does it attempt any font
substitution of its own.
|
|
SHOWSFM
|
(This is an internal variable and should
not be changed by the user.)
|
